AutoM8 fleet live map showing vehicle positions

Utilities fleet tracking gives a control room a live position for every engineer's van, a timed record of each visit and an early warning when a lone worker's vehicle stops where it should not. TrackerShop supplies it on AutoM8, the platform made by Scorpion Automotive, with connected dash cams for incident evidence. The page is for water, power, gas and telecom operators and their contractors, whose vans carry specialist kit to faults that cannot wait.

Why do utility and telecom fleets need different tracking?

Utility and telecom fleets need different tracking because the work is driven by faults and appointments, not routes. A water or power engineer responds to an event that reshuffles the day, while a telecom installer keeps a booked window at a customer's door. One system has to serve both patterns.

Utilities (water, power, gas) Telecom and cable installation
Typical trigger Fault, outage, emergency Customer booking
What the control room needs Nearest qualified engineer, fast Reliable arrival inside the window
Main risk Slow response, lone working Missed appointments, repeat visits
Evidence needed Time on site, route taken Proof of arrival, vehicle history
Camera value Claims, incidents on public roads Claims, parking and reversing at homes

For deeper material on each side, read our guides to water and utilities field service teams.

How does tracking speed up emergency response?

Tracking speeds up emergency response because the control room can see every engineer's position and choose the closest one in seconds. When a fault is logged, the person on the desk looks at the map, picks the nearest van and sends the job, with no radio round-robin.

After the event, journey history shows what the response actually looked like, which supports service-level reporting and the lessons that follow a serious fault. Driving also needs managing in its own right: collisions involving a working driver or rider accounted for 29% of road deaths in Great Britain in 2025 (Department for Transport, 2025).

How do you keep lone workers safe?

You keep lone workers safe by knowing where they are and noticing when something is wrong. A tracked van that stops unexpectedly on a quiet road, or leaves its planned area, can trigger an alert that prompts a welfare check. Engineers often work alone in remote sites, so this watch is the minimum. HSE guidance says employers should provide training, supervision, monitoring and support for lone workers, who face the same hazards as others but a greater risk of harm because no one is there to help (Health and Safety Executive, INDG73).

Live tracking and geofences are available now on the AutoM8 Track plan. TrackerShop also lists personal lone worker trackers for people who work away from the vehicle.

What evidence can you keep of every visit?

You can keep a timestamped record of when each van arrived at and left a site, the route between jobs and how the vehicle was driven. That record answers customer complaints, contractor invoices and regulator questions without anyone rebuilding the day from memory.

For incident evidence, connected cameras add video of the road ahead, the rear and the cab, tied to the same journey. AutoM8 stores clips in the cloud, so footage survives even if the vehicle is damaged. Forward collision, following distance, lane departure and pedestrian warnings come from the road camera, while phone use, tiredness and missing seatbelts come from the cab camera.

What does AutoM8 do for a utilities or telecom fleet?

AutoM8 gives a control room live tracking, geofencing, journey replay and fair driver scoring today, with AI cameras, CAN bus data and speed control added once the kit is fitted. Pricing is per vehicle per month.

To see how it maps onto depots and contractors, see what your field fleet needs.

How do you control running costs across a utilities fleet?

You control running costs by finding where fuel and wear leak: idling at depots and remote sites, harsh driving and inefficient routing. Reports pinpoint each, so you fix specific habits instead of issuing general warnings.

AutoM8's scores weight braking, cornering and speed by g-force and correct for vehicle weight, so a van loaded with pipe or cable is judged fairly against an empty one. Automatic MOT and tax checks help avoid a van being pulled off the rota at the last minute.

How do you roll tracking out across several depots?

  1. Group vehicles by depot and by role: emergency, planned maintenance, installation.
  2. Book fitting. Scorpion's installers fit AutoM8 kit at depots and other UK locations, depot by depot.
  3. Set geofences on depots, key sites and compounds, plus alerts for out-of-hours use.
  4. Agree what is recorded and who sees it, and tell staff before go-live.
  5. Add cameras to the vehicles with the greatest road or claim exposure.

Behind the kit sits Scorpion, a vehicle electronics maker since 1973 whose group handles 20,000 preventative calls a month. Pricing is per vehicle per month.

Frequently asked questions

What is utilities fleet tracking?

Utilities fleet tracking is the use of GPS trackers, driver scoring and cameras to monitor vehicles used by water, power, gas and telecom engineers. It gives control rooms live positions, timed visit records and incident evidence, so they can respond faster and prove what happened.

Does fleet tracking help with lone worker safety?

Yes. Live position and geofence alerts let a control room notice a van that stops unexpectedly or leaves its area and check on the engineer.

Can the same system serve a telecom installation team?

Yes. Installers need to arrive within a booked window, so live position and timed arrival logs matter more than emergency dispatch. The same AutoM8 account serves both types of fleet.

Do utility vans need connected dash cams?

They are worth fitting on vehicles with high road exposure or past claims. Connected cameras send clips to the cloud and, on AutoM8, link them to the journey. Cab-facing cameras need notice to staff and a documented reason. See the connected dash cam hub for the options.

How soon can a utilities fleet be tracked?

Kit and cameras are fitted by a mobile installer at the depot or another UK location, and rollout across several depots is planned vehicle group by vehicle group.

Talk to us about your field fleet

Enter your vehicle count across depots and contractors, and we will point you to the right team for a rollout.

See what my field fleet needs

Prefer to talk? Call 0330 055 2777.

Related reading

You may also want tracking for local authority fleets, service and maintenance fleets and healthcare transport fleets. The wider offer is under business fleet tracking and the connected dash cam hub.

CHECK AVAILABILITY

Need Your Product Fitted ASAP?

Call Us Now: 0330 055 2777

Need Help Choosing?

Let's Get Started
Back to blog